All Categories - Orbitmate

Starlink Sentry System

Applications: Widely used by U.S. Customs and Border Protection (CBP), it is described as a &quot;never-sleeping, never-blinking&quot; virtual border wall partner.<br><br>Energy Independence: The towers are typically equipped with solar panels and onboard processing architecture, enabling them to operate independently in remote areas without external infrastructure support.<br><br>Autonomous Sensing: Utilizing AI, computer vision, and machine learning technologies, it automatically detects, classifies, and tracks &quot;targets of interest,&quot; such as people or vehicles, miles away.<br><br>Lattice Software Platform: The towers integrate Anduril&#39;s Lattice OS. This system acts as the &quot;brain,&quot; processing data from radar, optical, and infrared cameras in real time and sending alerts to operators only when relevant activity is detected, reducing the burden of continuous human surveillance.<br><br>Rapid Deployment: The sentry towers are compact and can be set up and operational within four hours; variants, such as the Mobile Sentry, can even be set up by a single operator in 20 minutes.

Orbitmate 5G Router

Seamless 5G integration with Starlink systems<br>Combine multiple Starlink links into one unified connection<br>Distribute traffic across Starlink and other networks (5G/LTE, Cable, Fiber, FWA)<br>Enhance network performance with features tailored for Starlink environments<br>Built for Fixed Wireless Access (FWA) leveraging 5G technology<br>Engineered for compatibility with MSP 5G/LTE gateway hardware<br>Aggregate multiple FWA providers (Local Operator) into one network<br>Balance bandwidth across diverse connections (Cable, Fiber, 5G/LTE)<br>Enable phone tethering via Wi-Fi WAN or USB connectivity<br>Long-term reliability and support<br>Firmware is continuously upgraded for security patches and performance gains<br>Keep your network future-ready with ongoing device support from Orbitmate

5G+ low-orbit satellite camera-coming soon

The SCB600 5G+ low-orbit satellite camera empowers smart industry with technology

Solar Power Systems Compatible with Starlink

Reliable Solar + Battery Power for Satellite Internet in Off-Grid Environments<br><br>Stable power for Starlink in off-grid environments<br>Lower cost &amp; zero noise compared to generators<br>Engineered for harsh outdoor conditions<br>Standard<br>Load: Starlink Standard<br>Power: 65W-75W<br>750W Solar (250W*3)<br>2.5kWh / 5kWh Lithium Battery<br>1.5-day backup / 3-day backup<br><br>24/7 Internet connectivity<br><br>Zero fuel, zero noise<br><br>Designed for harsh &amp; remote environments<br><br>Use Cases<br><br>Remote homes<br>Villages &amp; community centers<br>Schools and clinics

Starlink Mini Travel Power Bundle

The Starlink Mini Travel Power Bundle provides an integrated connectivity and power solution engineered for mobile and off-grid operations. This configuration combines the Starlink Mini Terminal with the Orbitmate Power Station and 800W Alternator Charger, enabling high-speed satellite connectivity and reliable energy autonomy in field, fleet, or mission-critical environments.<br><br>The bundle supports mobile command units, remote maintenance teams, and field operations requiring consistent broadband access and self-sustaining power without dependence on fixed infrastructure. Designed for deployment flexibility and durability, the system delivers both connectivity and energy resilience across a wide range of operational conditions.

Starlink Mini Rapid Deployment Kit (no Power Station)

This rugged deployment kit delivers fast, stable connectivity in demanding environments. Built around the Starlink Mini, it features a durable rolling case with custom foam layout and space for an optional power station. Designed for rapid deployment, it offers weather-resistant protection and up to 50m WiFi coverage—ideal for fieldwork, emergency response, and remote operations.<br><br>Key Features<br><br>All-in-one solution with pre-installed, protected components<br>Dedicated space for power station (max L314 × W209.5 × H255.8 mm)<br>Heavy-duty wheeled case with extendable handle and 9” all-terrain wheels<br>Custom foam insert for secure transport<br>IP65-rated protection against dust and water<br>Enables WiFi internet and WiFi calling within 50m<br><br>Includes<br>Rolling tool box, custom foam insert, 20V USB-C power cable, clamp pole mount, and quick setup guide.

Powerbank for Starlink mini -20000ah

Battery Cell 1260110*1, 10,000-20,000 mAh<br>Type-C Input: 5V - 3A, 9V - 2A, 12V - 1.5A, 18W<br>Type-C Output: 5V - 3A, 9V - 2.2A, 12V - 1.67A, 20W<br>4 USB Output:<br>5V 4.5A, 5V 4.5A, 5V 3A, 9V 2A, 12V 1.5A, 22.5W<br>USB Cable Input: 5V/2A<br>Type-C Cable Output: 5V/2A<br>Lightning Cable Output: 5V/2A<br>Micro Cable Output: 5V/2A<br>Multiple Simultaneous Outputs: 5V/3A (Max.)

CCTV for starlink

RT990-5G Industrial CPE M12 Router

The RT990-5G from Orbitmate is a 5G CPE designed for harsh environments, meeting vehicle regulation standards for high/low temperatures (-40°C to 85°C) and vibration. It features a Qualcomm quad-core 1.8GHz CPU, 8GB RAM, 4GB eMMC, 2x2 MIMO WiFi 6, and 4x 1000M Ethernet ports, supporting 5G SA/NSA modes for reliable, high-speed connectivity. With IP67 protection, it’s ideal for engineering vehicles, mining vehicles, AGVs, trucks, and applications in smart grids, intelligent transportation, supply chain automation, industrial automation, smart buildings, fire protection, environmental monitoring, meteorology, coal, and petrochemical sectors.<br>Key Features:<br>Qualcomm quad-core 1.8GHz CPU, 8GB DDR3, 4GB eMMC<br>WiFi 6: 802.11ax (1201 Mbps at 5GHz, 573.5 Mbps at 2.4GHz); 802.11ac (866.7 Mbps at 5GHz, 400 Mbps at 2.4GHz)<br>Supports 5G SA/NSA, LTE, 3G<br>4x 10/100/1000M Ethernet (M12-A), 4x 5G antennas, 2x WiFi antennas (FAKRA), optional GPS antenna<br>2x NANO SIM slots, optional e-SIM<br>DC 10-36V power, IP67 protection

RT640-5G Outdoor 5G CPE

Features:<br> Quad-core high-performance 1.8GHz CPU<br> Industrial-grade DDR3 memory 8Gb, can work at -45-90 degrees<br> Large storage space up to 4GB<br> High-power WiFi6, 2*2MIMO2.4G&amp;5.8G total rate up to 1800M/bps<br> 2x2MU-MIMO onboard WiFi2.4GHz radio, theoretical rate up to 570Mbps<br> 2x2MU-MIMO onboard WiFi5.8GHz radio, theoretical rate up to 1210Mbps<br> 5.8GTCP rate up to 800Mbps<br> Support 5G, 4G, 3G networks, 5G supports SA, NSA networking mode<br> Optional single 5G module or dual 5G module, adapt to frequency bands in different countries and regions<br> Dual NANOSIM cards<br> 1 10/100/1000M Ethernet interface, support standard POE48V power supply<br> Optional 12-55VDC power supply<br> Outdoor protection grade IP67, waterproof, dustproof, can be directly installed outdoors<br> Support SNMP, TR069 and other remote management<br> Excellent heat dissipation design, operating temperature supports -40-85 degrees<br> CE/FCC certification

Starlink Mini Aluminum Alloy Roof Magnetic Bracket Protective Cover

【 Compatible with Starlink Mini 】 This Mini mount can be installed on recreational vehicles, yachts and trucks, allowing you to enjoy the fast and stable Internet service provided by Mini devices while driving.<br>【 High-quality Materials 】 The front end is equipped with a protective cover made of ABS and PC, while the rear end is fully wrapped with aluminum alloy. The bracket is closely attached to the side of the Mini, so there is no need to worry about scratching the machine. Sturdy and heat-resistant, the Mini roof installation can withstand the frequently encountered high temperatures, far exceeding the 3D printed structures on the market. This Mini installation kit can withstand sunlight, rain and bad weather, making it very suitable for long-term outdoor use.<br>【 Strong Magnetism 】Mini is composed of 4 high-strength magnets and a bracket. Each magnet can withstand a weight of up to 25 pounds, and 4 of them can bear a vertical holding force of 100 pounds, making the device more stable on an iron surface.<br>【 Hole-free Installation 】 The Mini mounting base requires no drilling. After assembling the mounting base, simply place it gently on the iron roof to complete the installation an

Starlink mini two-in-one with built-in stand power bank

25000mAh battery capacity, DC + TC output, suitable for convenient mobile device power supply, ideal for camping, RV living and remote work; features a built-in LED LCD screen to display real-time battery status.

Starlink GEN 3/V3 Aluminum Alloy Roof Bracket

Function: <br>Aluminum alloy aluminum die-cast base is used to be installed on the sloping tile roof; <br>the standard pivot seat rotation mechanism can be easily adjusted with a knob to adapt to various angles and directions, thereby maximizing the use of machine equipment; <br>the original pole was improved and upgraded in the case of looseness, thereby enhancing firmness and stability.

Starlink Gen 3-B Standard Pipe Adapter

This design 3 generation equipment large diameter base; ABS plastic molding<br><br>Applicable to GEN 3/V3<br>

Starlink MINI Suction Cup Car Mount

This product uses ABS/2 bar fixed equipment standard pivot four suction cup strong grip, can firmly fix the Mini in the right position, prevent it from slipping or falling off, easy knob adjustment, adapt to a variety of Angle directions, thus maximizing the use of machine equipment.<br>

Starlink MINI CAR Mount

Designed for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.<br>

Starlink GEN 3/V3 Replacement cable

Features:<br>1.Stable transmission - according to the original product standard <br>production, 1000-1200Mbps，smooth data transmission, no delay.<br>2.Durable - starlink cable contains 8 copper wires for data <br>transmission to ensure uninterrupted connection.The replacement <br>cable has a water and <br>rain proof design, making it suitable for indoor and outdoor as well as <br>harsh weather conditions.<br>3.Easy to install - just plug in to use, easy to install,<br> without any complex setup<br>4.Line lenth: 6.6ft/33ft/50ft/75ft/98ft/150ft/ <br>The length of the wire can be customized

Starlink 50M Enterprise Cable for Starlink Enterprise Dish - 164FT Cable

Length: 50 meters (approximately 164 feet).<br>Performance: The cable is engineered to minimize signal loss over its length, ensuring that the data and power transmission from the satellite dish to the indoor equipment remains efficient.<br>Installation: The cable is meant for both indoor and outdoor use, given its weather-resistant properties. However, it&#39;s not recommended for burial without proper conduit due to its specifications.<br>Compatibility: This cable is part of the Starlink Enterprise Kit, which suggests it&#39;s tailored for enterprise users. It&#39;s compatible with the Starlink Standard terminal within this kit but might not be interchangeable with other generation cables or third-party extensions due to its proprietary nature.<br>Connectors: The cable uses Starlink-specific connectors. These connectors are not standard RJ45 but are designed to provide a robust, weather-resistant connection between the Starlink terminal and other components of the system.<br>Cable Type: It&#39;s a proprietary cable, specifically designed for Starlink equipment. This cable typically includes a waterproof seal and a locking mechanism to ensure a secure and weather-resistant connection.<br>Purpose: Designed to conne

Starlink Flat High Performce Cable For Enterprise Edition

This cable is designed for connecting the Flat High Performance Starlink equipment; in case of damage, it replaces the standard cable from the high-performance kit.<br>Compatibility: Ultimate Edition , Enterprise Edition , Flat High Performance Kit, Tablet High Performance Kit.

Starlink GEN 2/V2 Replacement cable

Features:<br>1、 stable transmission - according to the original product standard <br>production, 1000-1200Mbps，smooth data transmission, no delay.<br>2、durable - starlink cable contains 8 copper wires for data <br>transmission to ensure uninterrupted connection.The replacement <br>cable has a water and <br>rain proof design, making it suitable for indoor and outdoor as well as <br>harsh weather conditions.<br>3、 easy to install - just plug in to use, easy to install,<br> without any complex setup